Ricoh AP410N 1.13 Router Login Information

To access your Ricoh AP410N 1.13 you will need the IP address and the login data (username and password).

Important: This is not the login data for your Internet service provider.

You can find this information in the Manual of your Ricoh AP410N 1.13 router. If you don't have the manual at hand or don't want to search the complete manual for the login credentials, you can use the Quick install guide which you can find below. To access the router login page it is important that you are connected to the router. Tip: If you have Wi-Fi problems and it is not possible to connect to the router, you can connect your computer and the router with a LAN cable.

Login Guide for Ricoh AP410N 1.13

• Click HERE to automatically detect the IP of your router. The IP detection tool will try to find your router IP and after some seconds you will see a link. Click on this link and you will be forwareded to your router login page
• Then you will see 2 fields where you can enter the router username and password.
  
  

  

• According to our database the default username of your Ricoh AP410N 1.13 router is admin and the corresponding password is (blank).
• Enter the username and password, click on the login button and now you should have access to the user interface of the router.

If the credentials do not work, try the following method

In the list below you can find some of the most commonly used username/password combinations of Ricoh routers. Try the following combinations. If you have problems logging in to the router or you have forgotten your password.

Username	Password
admin	(blank)
admin	password
(blank)	password
admin	admin
admin
(blank)	(blank)
(blank)	sysadm
sysadmin	password
admin	no password
admin	sem senha
(blank)	admin
	password
administrator	password
admin	odim
Supervisor	(blank)
(blank)	000000
admin	420008
sisadm	password

The most common IPs used by Ricoh routers

You have tried several different IP addresses and still none of them work? Then you should try the IP addresses from the following list.

Default Router IP
192.168.0.92
192.168.1.104
10.226.5.1
157.88.149.100
192.168.126.70
192.168.1.4
192.168.1.44
192.168.0.76
192.168.0.227

Nothing of the methods worked for me and I still not get access to my Ricoh AP410N 1.13!

If nothing helped and you really need access to your AP410N 1.13 router, there is also the possibility of a factory reset. In most cases you can perform a factory reset by pressing a small button on the back of the router for 10-20 seconds. After that the router lights up and needs some minutes to reset all settings. After a factory reset the router loses the connection to all other connected devices and some devices have to be reconnected to the router after such a reset. If you are unsure, you should consult an expert to help you set up the router again.